Frequently asked questions

Water Related Questions

Will the state of the water change when heated or refrigerated?

The state of the water does change when the water is heated or chilled. When heated, the ORP and pH changes. When chilled, the ORP will change but the pH will remain the same for up to a week based on the quality of water.

How do we begin drinking Kangen Water?

It is most common to begin by setting a low pH1 level (between pH8 and pH9.0), and gradually increasing the amount of intake. After continuing regular intake for about two weeks, gradually adjust the pH level and amount of intake (between pH9.0-pH9.5) based on your bodily needs and physical condition. The Kangen Water® should be as fresh as possible.

For children or seniors, set the pH level at an even lower level upon starting, and gradually increase it as the body adjusts to the current pH level.

In the case of infants (until about a year old), since breast milk or milk is the only thing they consume, the intestinal movement is generally different from adults, and the use of Kangen Water® is not encouraged until the infant begins to consume more sophisticated foods. In any case, Kangen Water® should not be used to make powdered milk for infants.

What is the proper amount/method of drinking Kangen Water?

There are no set rules regarding how to drink Kangen Water® or how much to consume.

What is the proper method of Strong Kangen Water/Strong Acidic Water, and how long do they last?

Among the five types of water produced by LeveLuk, the two types for drinking (purified water/Kangen Water®) must be used fresh. Please keep these two types of water in the refrigerator for no more than 4-5 days and replace the water in your take-out bottle everyday. For water used for domestic purposes, including Acidic Water, Strong Acidic Water and Strong Kangen Water, less care is required, but we recommend changing your supply once a week. To store, please place the water in a lightproof container1, fill it to the very top to avoid unnecessary contact with air, and store it in a cool, dark place (the refrigerator is ideal).

How do I use Kangen Water for beauty care?

Because winter air is extremely cold and dry, skin care is especially important during this time. Without taking care of your skin properly, you will suffer from dry and rough skin. Bodily fluids play an important role in maintaining your body temperature and the health of your skin. Drinking alkaline Kangen Water® can help maintain glowing, smooth skin. Since it is important to maintain your skin's pH level between 5.0 and 6.0, we recommend spraying acidic water1 on your skin at regular intervals throughout the day. During the winter, bathing in acidic water can help preserve the moisture of your skin. We also recommend that you eat foods and fruits that include high levels of vitamin C, A and E. Treating your skin with beauty water will let you enjoy life even more by giving you smooth and youthful skin.

Machine Related Questions

What if there's no cartridge replacement notice even after a year?

The display screen on the LeveLuk will notify you when the total volume of water produced reaches 1,500 gallons. The microcomputer controls this notification mechanism, please make sure to press the reset switch to activate the microcomputer when you put in a new filter. The reset switch is located on the top right of the cartridge section (inside the black cover on the left). Please press it until it beeps. The microcomputer controls other information for the LeveLuk as well, which is why it is critical to remember to press the reset button.

How does the automatic draining system work?

LeveLuk is equipped with an automatic water-draining system that prevents contamination and proliferation of germs in residue water. The automatic water draining system is activated once the water stops. It takes approximately 30 seconds for all water in the electrolysis cell, water purification cartridge, and all channels to be drained through the hose (grey). Please note that the automatic water draining system is activated when the water level drops, and positioning the spout higher than the base of the appliance for any reason (pooling of acidic water in the tank, hanging the hose from a rack because of its length) may result in a failure to discharge residue water. Leaving water behind may cause problems with taste and smell. Please be sure to have the spout hose lower than the appliance before turning the tap off.

The flexible pipe is not allowing for the smooth flow of water. What should I do?

When the original tap water supply is high in minerals (most often seen with well water), a large amount of crystals are formed in the electrolysis cell. If this progresses, chunks of crystals can become stuck in the net before the flexible pipe, obstructing the water outflow. In order to remove this clog, poke the area with a piece of wire and blow air into the LeveLuk from the spout. Please remove the flexible pipe from LeveLuk when cleaning in this manner.

What are the changes to the Kangen Water® outlet as a result of switching water production mode?

Electrolyzing water produces Kangen Water® (alkaline) on the negative pole and acidic water on the positive pole. LeveLuk is designed so that the flexible pipe attached to the top is connected to the negative electrolysis cell, while the discharge (gray) hose, attached to the base of the LeveLuk, is connected to the positive electrolysis cell.

For this reason, Kangen Water® and strong Kangen Water® comes out of the flexible pipe, and acidic water and strong acidic water comes out of the discharge hose. Of the four production modes, when the appliance is set on the "beauty water" mode, the electric current is reversed, as it is done for cleaning, so acidic water comes out the flexible pipe and Kangen Water® comes out the discharge hose. This is the only time the waters are discharged on the opposite ends. Since the acidic mode reverses polarity, it has the effect of breaking off calcium crystals attached to the negative pole and can be used as a manual cleaning mode.

What is special about LeveLuk's strong acidic water production system?

Traditionally, strong acidic water could only be produced with large devices for institutional use (at the time, strong acidic water was called hyper acidic water). We thought that it would be highly beneficial for people's hygiene if they could produce and use strong acidic water in their homes. The LeveLuk makes it possible to produce fairly large quantities of strong acidic water and strong Kangen Water® at home.